Best Chainsaw Mill (October 2019) – Top 10 Picks & Reviews

Know How to Choose the Best Chainsaw Mill

Chainsaw milling can be done for personal consumption or for small business. It can be a lucrative business if done properly and you have chosen the right chainsaw mill that meets your requirements.

There are several reasons why chainsaw milling is gaining rapid popularity among folks. First, it requires lesser capital compared to a portable chainsaw mill. Second, it is more portable and lighter compared to chainsaw mills. Third, it is easier to start chainsaw milling and requires lesser space for storing your equipment.

If you don’t have any idea yet on how to choose the right chainsaw mill, good thing you came to our place. We are going to show a quick and easy guide on how to choose the best chainsaw mill for 2019. Likewise, to save you some time, we included a comparison chart and in-depth product review for the top 10 best chainsaw mill for 2019.

More...

KNOW WHAT TO LOOK FOR the Best Chainsaw Mill

Here are the important features and factors you need to look for when choosing for the best chainsaw mill that will meet your requirements.

1. Chainsaw Fit

This is a critical factor as not all chainsaw mill designs will fit your chainsaw tool. Make sure the chainsaw mill you are going to buy will have adjustable settings to fit any chainsaw model.

2. Cutting Depth

You must choose a chainsaw mill with adjustable cutting depth. Why? Because this determines how thick are the boards and planks you will be producing. The thicker the board or plank, the lesser quantity you will be producing out of a certain tree log.

3. Bar Capacity

You need to have a clear estimate of the tree diameter you are planning to process for your chainsaw mill. Why? Because the bar capacity of any chainsaw mill limits the maximum tree width you can mill.

4. Durable Built

A good chainsaw mill must be tough enough to withstand extreme pressure and force from milling using a chainsaw. Ideal material for this can be a combination of aluminum or magnesium and steel.

5. Weight

This part is a bit tricky because you will compare two factors - convenience of transport or stability of work. A heavier chainsaw mill will give you much stability and steadiness during cutting. However, you will have a hard time carrying and transporting it from one place to another.

Meanwhile, a lightweight chainsaw mill will be convenient to carry and very portable. However, you will have a slightly hard time keeping it steady while cutting through the wood.

Top 10 Best Chainsaw Mill reviews

1. Granberg Chainsaw Mill Model#G777

Features:

  • Chainsaw bar length: 16” – 20”
  • Cutting depth: ½” – 13”
  • Width: up to 18”
  • Weight: 1.76 ounces

pros

cons

• Easy to assemble

• No critical issues so far

• Smooth zinc coating

?

• Properly labeled parts

?

• Durable and well-balanced

?

• Friendly instructions manual

?

Best Choice

This chainsaw mill is easy to set up with the aid of its friendly instructions manual. All parts are coated nicely with zinc for increased durability and resistance to corrosion. Amazingly, it can keep its balance using a 20” bar chainsaw, thus, having precise cuts. Overall, the mill construction is sleek and tough. A great investment for a start in the milling business.

2. Carmyra Chainsaw Mill 14”-36”

Features:

  • Chainsaw bar length: 14” – 36”
  • Cutting depth: 0.5” – 13”
  • Width: 36”
  • Weight: 16.55 lbs

pros

cons

• Easy to assemble

• None

• Easily attaches to your chainsaw bar

?

• Can accommodate Cedar, Walnut, and Oak

?

• Lightweight and durable aluminum and steel building

?

Best seller

This mill comes with an easy to follow the schematic diagram. Approximately, assembling this can take around 30 minutes. It is quick and easy but makes sure you clamp it where the sprocket and bar meet. It is amazingly lightweight but sturdy enough to take on a 36” bar chainsaw. The external finish is smooth and corrosive resistant.

3. Alaskan Mark-IV Chainsaw Mill 24”

Features:

  • Chainsaw bar length: 20” – 24”
  • Cutting depth: ----
  • Width: 16” – 18”
  • Weight: 17.7 lbs

pros

cons

• Weather and corrosion resistant coating

• Hope they can make the height adjustment easier & faster

• Well-balanced construction

?

• Easy to assemble

?

• Durable steel

?

This chainsaw mill looks really tough and professional-looking. Overall construction is really smooth and weather resistant, but there are some points to clarify to get complete satisfaction. The clamp at the end of the bar must be placed before the end sprocket. This mill can accommodate 20”-24” bar and cut a 16”-18” diameter wood. Likewise, if you’re planning on making your own guide, have it overhand on both sides about 6” to keep the beginning and end at the level.

Hope they can enhance the bolt and nut height adjustment system to something easy and faster.

4. HiHydro Chainsaw Mill 14”-24”

Features:

  • Chainsaw bar length: 14” – 24”
  • Cutting depth: 0.5” – 13”
  • Width: 36”
  • Weight: 14.7 lbs

pros

cons

• Easy to assemble

• None so far

• Effective cutting guide

?

• Lightweight and sturdy aluminum and steel body

?

Assembling this chainsaw mill is straightforward with a few things to note in order to avoid problems. Do not tighten up everything until the whole thing is assembled. It can effectively guide the cutting of your chainsaw without any hassle. The overall body is well-balanced and lightweight for convenient transport.

However, it would be nicer if the actual positioning of the saw in the mill is more detailed.

5. Granberg G555B Edging Mill

Features:

  • Chainsaw bar length: 16” – 36”
  • Cutting depth: 0.5” – 13”
  • Width: 36”
  • Weight: 6.8 lbs

pros

cons

• Smooth guide cutting

• No critical complaints so far

• Effective for square cutting

?

• Durable and lightweight construction

?

• Can accommodate 50-70cc chainsaw

?

• Includes a 12 ft V rail for cutting guide

?

Amazon's Choice

This is a good and budget-friendly mini mill. It is easy to use and set up. This is ideal for edge milling and squaring off one side of a board. It is very portable and lightweight. It can smoothly guide edge cutting which is not that effective with regular chainsaw mills.

6. Popsport Chainsaw Mill 14”-48”

Features:

  • Chainsaw bar length: 14” – 48”
  • Cutting depth: 0.5” – 13”
  • Width: 48”
  • Weight: 18 lbs

pros

cons

• Aluminum and stainless body

• The instructions manual needs improvement

• Lightweight and portable

?

• Smooth coating

?

• Sturdy built

?

This chainsaw mill comes with a wrench and small crescent wrench. The assembling process is fine but you need to take note of the important things for the mill. Better set up the upright assemblies first and make sure the bolts and nuts are properly inserted. The chainsaw mill’s body is lightweight but pretty much strong and smooth corrosive-resistant coating.

Else, they need to improve the instructions manual.

7. TTF Chainsaw Mill 14”-24”

Features:

  • Chainsaw bar length: 14” – 24”
  • Cutting depth: 0.5” – 13”
  • Width: 24”
  • Weight: 12.7 lbs

pros

cons

• A smooth and effective cutting guide

• The instructional manual must be enhanced

• Smooth cutting depth adjustments

?

• Lightweight and portable

?

• Good quality steel and an aluminum component of the mill

?

Amazon's Choice

Assembling this chainsaw mill is actually straightforward but you really have to understand the manual. So far, the cutting depth adjustment works fine, same with the width. The mill’s overall built is decent and durable. The steel parts are also coated to withstand weather and corrosion.

Advising: Improved instructions manual to make the assembly and usage faster and easier.

8. CO-Z Chainsaw Mill 14”-24”

Features:

  • Chainsaw bar length: 14” – 24”
  • Cutting depth: 0.5” 13”
  • Width: 24”
  • Weight: 15.75 lbs

pros

cons

• Durable steel and aluminum metal parts

• Instruction manual needs improvement

• Smooth cutting depth adjustment

• Slightly difficult to insert the chainsaw bar

• Affordable price

?

• Lightweight

?

This chainsaw mill is really portable but sturdy enough to take on a 24” bar chainsaw unit. It has smooth coatings to resist weather and corrosion. The body is made from aluminum and steel metal. Assembling the whole thing is actually easy but the instruction manual included is like a puzzle. Overall, it is a good mill for investment.

They need to improve instruction manual. Likewise, attaching the chainsaw bar on the two bars of the mill seems difficult because of the odd location of the bolt and nut on top of the two bars.

9. NAWODH Chainsaw Mill 14”-24”

Features:

  • Chainsaw bar length: 14” – 24”
  • Cutting depth: 0.5” – 12”
  • Width: 24”
  • Weight: 12.7 lbs

pros

cons

• Stainless steel and aluminum material

• Lack of instruction on the assembly process

• Lightweight and portable

?

• Affordable price

?

• An effective hold of chainsaw bar

?

It holds up your chainsaw effectively and keeps the workplace stable while cutting. The effective hold on the chainsaw bar is due to the square stock on top of the bar clamps. The material of the mill is sturdy and decent. It also has a coating for extra protection against corrosion. Moreover, it comes at an affordable price which is friendly for beginners.

Else, the package does not include any instruction manual.

10. TC-Home Chainsaw Mill 14”-36”

Features:

  • Chainsaw bar length: 14” – 36”
  • Cutting depth: 0.5” – 13”
  • Width: 36”
  • Weight: 13.5 lbs

pros

cons

• Lightweight and portable

• Nothing so far

• Smooth height and cutting depth adjustment

?

• Decent stainless steel and aluminum parts and body

?

Best Budget

With the aid of the instruction manual, the assembly process was smooth and easy. The adjustable height and cutting depth add more work versatility. You can easily carry it around for it is lightweight. Overall built is seamless and sturdy.

Kevin Smith
 

Hi, i'm a coffee addicted guy and i love my home so that i create this website to discuss about luxury home stuff and how to improve our lifestyle with stuffs.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: