Best Corded Circular Saw (July 2019) – Top 10 Picks & Reviews

Know How to Choose the Best Corded Circular Saw

There are pros and cons you need to weigh in choosing this tool type. One major advantage of this type is that it has superior cutting power compared to cordless ones.

Most corded circ saws have around 7.25-inch blades while cordless ones have a 6.5-inch blade. Their larger blades provide more power and speed which gives them that cutting edge.

Another advantage would be no worries about buying batteries. Even though it has limited portability, still getting a longer power cord or extension wire can increase its range. Moreover, these types are priced at half compared to their cordless counterparts.

Now, let's go over on how to choose the best-corded circular saw in the market.

More...

KNOW WHAT TO LOOK FOR The Best Corded Circular Saw

1. Circular Saw Blades

The power tool’s saw blade is a determining factor for its performance. Choose and buy a unit whose blade fits the task you mostly do. Below are the common saw blade mostly used by people.

  • High-speed steel blades: This is harder than steel which stays sharp for a longer time.
  • Carbide-tipped blades: Similar to the first type but with carbide tips so it’ll stay sharper for a much longer time.
  • Tile-cutting blades: It has a diamond tip that is designed to cut effectively through tiles.
  • Masonry blades: It has an abrasive edge fit for cutting bricks and other masonry materials.

2. Wattage

This is a good measure of power. Typically, corded circular saws have a 2400 watts surge power and an operating wattage of 1200 watts.

3. Power Sources

  • Corded: The portability is dependent on the power cord length. There’s no power limit and it can work for long hours.
  • Cordless: Very portable but the main setback is its limited power which is dependent on the battery’s capacity.

4. RPM Speed

A typical 7.25” diameter saw tool has an average rpm of 5,800. Most power tools have their blades mounted directly to the motor shaft. In contrast, worm drive circular saws have a general speed of 4000 to 5000 rpm.

5. Blade Capacity

This refers to the maximum cutting depth of the circular saw unit. A wider blade diameter means higher blade capacity. If you want a light and easy to use saw tool, better choose a unit with smaller blade capacity. A blade capacity of 6 inches and above can cut through a 2-inch width wood in a single pass.

6. Electric Brakes

This feature is good for work convenience and safety purposes for it stops blade rotation in a short span of time. It works by reversing electricity flow inside the motor and stops the blade for approximately 2 seconds.

7. Laser Guide

An added feature in order to improve cutting accuracy by following a laser guide directed on the stock.

8. Bevel Stops

Preset divisions of the bevel for easy angle cut adjustments.

9. Bevel Capacity

It tells the maximum slope cut a circular saw tool can achieve.

10. Spindle or Shaft Locks

A safety feature used when changing saw blades. It ensures that the shaft and blade are in a fixed position while removing and installing a new blade.

Top 10 Best Corded Circular Saw reviews

① SKIL 5280-01 15A 7-1/4-inch Corded Circular Saw with Laser Guide

FEATURES
  • Motor: 15Amp
  • RPM: 5,300
  • Blade: 7-1/4 inch
  • Cutting depth: 2-3/8 inch
  • Bevel: 51°
  • Weight: 12.1 lbs
  • Laser guide: Yes
  • Dust Blower: Yes

pros

cons

• Smooth blade guard

• No electric brake and LED lights

• Nice grip and great power

• Safety-lock feature is easy to use

• Consistent rotation even with a load

Best Choice

This corded circ saw cuts through a wood in a single pass like butter. It cannot directly go through the 4x4 and so you’ll have to cut it in 2x4s. The tool's design and laser beam guide give you an effortless straight cut. Likewise, the bevel adjustments from 0 to 51° gives you extra versatility for angle cuts.

Note: This unit seems to have no electric brake which comes really useful for some instances. It also has no LED lights in case you’ll be cutting in dimmer places.

② Makita 5007MG Magnesium 7-1/4” Corded Circular Saw

FEATURES
  • Motor: 15Amp
  • RPM: 5,800
  • Blade: 7-1/4 inch
  • Cutting depth: 90° - 2.5”
  • Bevel: 56°, positive stops at 22.5° & 45°
  • Weight: 10.6 lbs
  • Laser guide: Yes
  • Dust Blower: Yes

pros

cons

• Durable and easy to use

• Slightly hassle putting it back into the case

• Lightweight and Powerful

Magnesium Built

Makita seems to continue manufacturing great tools. This one cuts seamlessly and sounds like a banshee scream. I am impressed with the ergonomic design of the saw which enhances its balance. When doing angle cuts, no worries for the bevel adjustments run smoothly. I’m amazed that for light circ saw, it comes with great power.

The only thing I don't like about it is that you’ll have to adjust the height down all the way so it fits right back into the case.

③ TACKLIFE TCS115A Corded Circular Saw with Laser Guide

FEATURES
  • Motor: 5.8A 710W
  • RPM: 3,500
  • Blade: 24T, 60T, and grit diamond blade (115mm)
  • Cutting depth: 1-11/16” @90°, 1-3/8” @45°
  • Bevel: 90-45°
  • Weight: 8.27 lbs
  • Laser guide: Yes
  • Dust Blower: Yes

pros

cons

• A neat little tool with great power

• Shoe seems to be breakable

• Effortless straight cuts

• Easy bevel adjustments

Best Seller - 6 Blades

I like this tool for at the right price you get more quality and power. It’s lightweight and comfortable to use with its rubberized handle. This one has no problem creating straight cuts with its laser guide and ergonomic balance. I like also how you can easily adjust the bevel in making angle cuts and the added blades give you more options for work.

Overall, I find no serious problem with this neat little tool. The only thing they can improve is the shoe for it seems to be less durable or breakable.

④ TACKLIFE PES01A Classic Corded Circular Saw Aluminum Guard

FEATURES
  • Motor: 12.5Amp
  • RPM: 4,700
  • Blade: 7-1/4”, 7.5”
  • Cutting depth: 2.5” – 1-4/5”
  • Bevel: 0-45°
  • Weight: 9.3 lbs
  • Laser guide: Yes
  • Dust Blower: Yes

pros

cons

• Lightweight and convenient to use

• There are instances when there’s a slight misalignment between the bevel and laser guide.

• Solid body and good balance

• Great amperage and cutting strength

Aluminum Guard

It’s not a perfect worm drive but it’s a solid one. I like this one for it has good amperage and power to pass through wood stocks. It’s very easy to maneuver and the laser guide works extremely well. There are comfortable handle and switch is accessible. No problem with changing blades with this one. Perfect fit for the price.

You just need to check the bevel adjustment and laser guide to ensure straight cut before working.

⑤ SKILSAW SOUTHPAW SPT67M8-01 15Amp Corded Circular Saw

FEATURES
  • Motor: 15Amp
  • RPM: 5,300
  • Blade: 7-1/4”
  • Cutting depth: 2-7/16” @90°
  • Bevel: 0-56°
  • Weight: 10.6 lbs
  • Laser guide: No
  • Dust blower: No

pros

cons

• Great cutting action

•Noise level might seem too disturbing for others

• Lightweight and easy to handle

• Great left saw blade for better line of sight

Sidewinder, Left Blade

This is the perfect solution for those looking for a left blade saw. I like this tool for it has a solid base and great cutting action. It uses a narrow kerf blade for reduced wood waste and it tracks exactly at the edge. The best feature for this is its left blade for it gives a better cut line of sight. It's really a good thing the parts and plate are made from magnesium or else this would have been heavier.

So far, no serious problems are encountered with this tool.

⑥ WORX WORXSAW 4-1/2” Corded Circular Saw WX429L

FEATURES
  • Motor:
  • RPM: 3,500
  • Blade: 4-1/2”
  • Cutting depth: 2”
  • Bevel: 0-45°
  • Weight: 6.0 lbs
  • Laser guide: No
  • Dust Blower: No

pros

cons

• Lightweight and easy to maneuver

• Not enough power to take heavy tasks

• Delivers enough power for its size

• Good quality for an affordable price

Lightweight

This tool has a smaller size and lightweight which is friendly for smaller hands and women. External casing and parts are made from hard plastic which still makes it durable. I like this tool for despite its smaller size, it can still take on 2x4s effectively at a slower rate. It’s amazing this one comes with a rip fence and its narrow sled width for easier cutting.

However, the rip fence seems to be breakable and misaligns whenever tightened.

⑦ Makita 5007F Corded Circular Saw

FEATURES
  • Motor: 15Amp
  • RPM: 5,800
  • Blade: 7-1/4”
  • Cutting depth: 2-3/8” @90°, 1-3/4” @45°
  • Bevel: 0-45°
  • Weight: 11.1 lbs
  • Laser guide: Yes
  • Dust Blower: Yes

pros

cons

• Strong motor

• Slightly heavier compared to counterparts made from magnesium

• Smooth cutting

• Easy to use and precise cuts

For the right price, this one is a bigger trade-off. It's a great partner for DIY enthusiast and woodworkers. It is easy to use and the base is solid. I like its motor for there's less maintenance but still delivers enough power for the job. Guaranteed smooth cutting action and the blade guard runs smoothly as well. This is a great tool for your home and repairs.

It’s not really a bad thing but for some delicate works, its weight seems to be heavy compared to counterparts made from magnesium.

⑧ Rockwell RK3440K Versacut Corded Circular Saw with Laser Guide

FEATURES
  • Motor: 4 Amp
  • RPM: 3,500
  • Blade: 24T for wood, 44T HSS for aluminum & PVC, grit diamond blade for ceramic tile and cement board
  • Cutting depth: >1”, adjustable cut depth
  • Bevel: ---
  • Weight: 3.4 lbs
  • Laser guide: Yes
  • Dust Blower: Yes

pros

cons

Compact and strong motor

• The extra effort you’ll exert to give a good cutting action

• Lightweight and easy to maneuver

• Good quality for an affordable good price

The best feature I like about this tool is its VersaCut. The heavy and bulky head of the saw gives it extra power to give effective and straight cutting action. Another feature I like from this tool is its adjustable cutting depth. Setting it is easy and the blade cuts through the desired depth. When doing repairs on the walls and edges, this one fits best. The last feature I like is its three different blades which give you the option to work on woods, aluminum or ceramic surfaces.

It’s not really a bad thing but the effectivity of the VersaCut also depends on how much force you exert in pushing it down while cutting.

⑨ Makita 5377MG Magnesium Corded Circular Saw

FEATURES
  • Motor: 15Amp
  • RPM: 4,500
  • Blade: 7-1/4”
  • Cutting depth: 2-3/8” @90°
  • Bevel: 0-51.5°
  • Weight: 13.2 lbs
  • Laser guide: No
  • Dust blower: No

pros

cons

• Lightweight and durable

• Increased cutting depth

• Less maintenance

• Effective torque and great quality

The thing I like most about this tool – it’s lightweight and well-balanced. Its magnesium parts contributed to why it's pretty light compared to regular ones. It has longer levers which give more advantage for performance. The unique thing about this tool is its "hypoid" gears that are present to the worm-drive mechanism. The unique shape of the gear teeth gives that extra torque action. This mechanism also requires less lube for operation.

Perhaps, the best thing to recommend is to increase the cutting depth of the tool similar to its cordless models.

⑩ SKILSAW SPT77WML-01 15Amp Corded Worm Drive Circular Saw

FEATURES
  • Motor: 15Amp
  • RPM: 3,500
  • Blade: 7-1/4”
  • Cutting depth: 2-3/8” @90°
  • Bevel: 0-45°
  • Weight: 11.6 lbs
  • Laser guide: No
  • Dust blower: No

pros

cons

• Strong motor and powerful cuts

• Magnesium plate seems to bend a bit when too much pressure is exerted

• Precise cutting with a clear line of sight

• Low maintenance

Amazon's Choice

I like this tool for it’s a perfect partner for any carpentry or framework installations. It works better than a standard sidewinder DeWalt circ saw. It operates the same way as Mag77 but much lighter. Plus, the bevel adjustments is smoother. All you need to do to keep it functional for a long time, keep it lubricated before using.

Most issues are on the magnesium plate for it seems to bend when great pressure is exerted.

Kevin Smith
 

Hi, i'm a coffee addicted guy and i love my home so that i create this website to discuss about luxury home stuff and how to improve our lifestyle with stuffs.