Best Screws For Particle Board
Particle Boards are not the best things to work with, especially when it comes down to drilling and inserting the particle board screws. More importantly, you need to master the technique of inserting the screws.
With the right technique and of course, the right and the best screws for particle board, your life will be a lot easier when it comes to handling a particle board. Let us take a look at the things you need to know before your hands take over.
If you don't have to time to go through this article, you can check out our top rated screws for particle board
What Are The Best Screws For Particle Board?
Firstly it is essential to know some definitions.
So, What Is Particle Board?
Particle boards, also known as chip boards, are an engineered wood product, which is usually crafted from either wooden chips or sawmill dust. The fine particles of wood are the main constituents of it and that is the reason why it is called the Particle Board.
These fine particles of wood are pressed and extruded and given shape like planks. Oriented strand board, are similar to the particle boards, but offer more strength.
Particle boards are cheaper, denser and offer more uniformity than the regular plywood. Particle boards can also be painted using wood veneers to give it a more refined and a modern appearance.
Though particle boards are cheap, they are light and are the weakest type of fiberboard in the market. Particle board cabinets are made of these particle boards and are extremely popular among families, mainly because of its multi-purpose nature.
Let us now take a look at the function of the screws!
What Are Screws Used For?
Screws are generally a type of fasteners, similar to bolts, used to fasten or hold tight two products together. Typically made of metal and characterized by a helical ridge, known as the thread or male thread.
Screws have an inclined plane, which is wrapped around a nail. While the nail goes and acts as the joint of the two products, the inclined plane serves the purpose of fixing the male and female part in a uniform groove.
Other screw threads are designed to cut the helical groove in a comparatively soft material. The grooves are designed in such a way that the most of the screws turn in a clockwise manner, while there are exceptional screws which do turn anti-clockwise.
These screws are generally bigger, both in their function and appearance as they are mainly used in lap joints or parallel joints.
The different types of screws include,
- Machine screws
- Hex Cap Screws
- Lag screws
- Bone screws
The head of the screw is the part with which the screw drives in. The different types of screw heads include,
- Pan Head
- Button head
- Round head
- Mushroom or Truss head
- Countersunk or flat head
- Oval or raised head
- Bugle head
- Cheese head
- Fillister head
- Flanged head
Let us now take a look at what the particle board screws are since we will be dealing with the technique and right screws for your particle board.
Before we head into the discussion about screws for particle board, we need to understand that working with particle boards are not the easiest and not the safest form of wood work.
It is recommended that you take all the adequate protection before doing this type of work, especially when it comes nailing down on a plank.
Here are a few tips to get you sorted before you start drilling into particle boards.
- Pilot holes should be 85% of the diameter of the screw.
- Pilot holes should be deeper compared to the length of the screw.
- Screws into the face should more than an inch from the edge.
- Screws in the edge should be at least 2.5 inches from end.
- You should not over-tighten screws as it might crack the joint.
Best Wood Screws For Plywood
Plywood is one of the products of fiberboard. Being a lot less dense and more expensive than the particle board, it is a wise investment when it comes to long term use. Wood screws go well with the plywood along with some glue on the joints to hold them off.
Wood glue, if used correctly, will have a stronger bond than the bond between the joints of the wood. The type of glue depends on your project; whether it will come in contact with water or not.
If it does not comes in contact with water, you may go for any glue but if it is not the case, you might want to go for a special glue which is water resistant and holds the bond equally strong.
Another aspect of working with particle boards is the Melamine-coated particle boards. The best screws for melamine board? Read on to find out.
Particle boards with the melamine coating are most commonly used to craft the regular cabinets and closets. The heavy weight and the poor strength are the added disadvantages of using particle board with melamine-coating.
As a result, it lacks enough support and strength when it comes to drilling screws in the particle boards. While cutting the melamine shelving, you need to remember these things,
- Cutting Direction: Regardless of the screw and the other equipments, the cutting direction is the most important when it comes to particle boards. It is recommended that you start either from the taped or the finished edges to gain precision.
- Feeds or Speeds: Low feed rates with high speed equipments are particularly effective against the weak particle boards.
As far as the best screws for melamine is concerned, 1 ½ inches 8 coarse thread gold screws are effective and durable too, holding and providing decent amount go grip to the joints.
We have selected few of the best particle board screws available. Feel free to compare them.
Name of screws
This concludes the list of the best screws for board particles. Also, you can see our top rated screws for particle board here.
A video insight about woodworking and the type of screws required
Working with Wood Panels (OSB, MDF, Chipboard) via Norbord Europe Ltd.
Last Updated on