Best Track Saw (June 2019) – Top 10 Picks & Reviews

Track saws are used for making better long and accurate cuts compared to the table and circular saws. They are better cutting tools for it does not require clamps in making precise cuts.

These tools are slightly more expensive than circular saws but the benefits are really worthwhile. There are so many features and benefits to like about this powerful tool.

We are going to show a simple guide on how to choose the best track saw for 2019. We also included an in-depth product review for the top 10 best track saw for 2019 to save you some time from hovering over hundreds of units in the market.

More...

TOp 10 track saw: KNOW WHAT TO LOOK FOR 

Here are some of the important features and factors to be considered when buying a good track saw.

1. Speed (RPM)

A higher free-load rpm speed is more preferred in order to still deliver enough speed when the load is present. Typically, track saws have an average speed of 2,000 rpm but you can buy something which can deliver more, like 5,000 rpm.

2. Bevel Range

A track saw which can do angle cuts other than 90 degrees will give you more work versatility. This feature is beneficial when you are doing furniture or curve cuttings.

3. Motor Power

The strength and speed of any power tool depend on the power capacity of the motor. A 9-amp motor spec would be a good minimum power requirement for DIY and woodworks.

4. Portability

The portability of any power tool is dependent on whether it is corded or cordless. A cordless tool is very portable but the power is limited to battery capacity. Meanwhile, corded types provide greater power but portability is limited with the length of the power cord.

5. Rail

The length of the rail is an essential factor for any track saw. The amount of job you can do depends on the length of the rail. It is a good thing for manufacturers have considered this concern, thus, various rail lengths are available in the market.

6. Saw Blade

The most track saw comes with the regular saw blade when you buy it. To ensure great cutting experience, it’s better if you will buy good quality blades in your nearby shops.

TRACK SAW Reviews

1. Festool 575389

Tools included:

  • Cutting depth: 2-3/4 inch
  • Depth control: Yes
  • Rail length: 32” – 106”
  • Splitter: spring-loaded knife
  • Motor: 1600 W
  • RPM: ----
  • Weight: 13.6 lbs

pros

cons

• Precise straight rips

• Slightly expensive but worth it

• Durable built

• Nice tracks and no tear out

The best thing about this saw tool is its consistent straight cuts with the aid of the guide rail. The guide rail is really useful and reliable. Other things to love about this tool include no tear out, able to shave off narrow chunks, smooth cuts, easy to use and sturdy built.

Overall, this tool seems to be pricey but really worth it.

2. Makita SP6000J1 6-1/2”

Tools included:

  • Cutting depth: 2-3/16” to 1-9/16”
  • Depth control: Yes
  • Rail length: 55”
  • Splitter: splinter-free cuts
  • Motor: 12 A
  • RPM: 2,000 – 5,200
  • Weight: 28 lbs

pros

cons

• The great dust collection system

• Minor kickbacks and the tiny button for the scoring knob seems to be flimsy

• Precise straight cuts

• Easy Depth adjustments

This track saw has an amazing dust collection system which you can improve by taping the side hole. Its brushes are very easy to change, takes 2 minutes to do it. This tool delivers a decent power which can cut through a ¾ plywood or 6/4 solid timber. So far, it did not fail to give precise straight cuts.

However, the tiny button for the scoring knob seems to be flimsy.

3. Festool TS 55 REQ

Tools included:

  • Cutting depth: 2-3/4”
  • Depth control: micro adjustable
  • Rail length: 42” to 106”
  • Splitter: spring-loaded
  • Motor: ---
  • RPM: ---
  • Weight: 19.56 lbs

pros

cons

• Durable and nice track

• The user manual is not that helpful

• Sturdy body

• Splitter functions well

The guide rail of this track saw is impressive for it greatly ensures straight cuts. The cuts from this tool ensure a chip-free even cutting a 4/4 Cumaru timber. It works really fine when cutting panels, doors, plywoods, and wood sheets.

Only one small cons, the user manual is not that friendly.

4. DEWALT DWS520K 6-1/2”

Tools included:

  • Cutting depth: 2-1/8” – 1-5/8”
  • Depth control: yes
  • Rail length: ---
  • Splitter: splinter-free cut
  • Motor: 12A 1300W
  • RPM: 1750- 4000
  • Weight: 11.5 lbs

pros

cons

• Easy to use and maneuver

• Tracks are sold separately

• Plunge mechanism works well

• Strong built and good blade quality

This track saw has an amazing cutting down capacity with wood sheets and plywood. It decently provides precise, straight cuts. Its plunge mechanism works very well and using the track would ensure accurate rips.

Currently, the tracks are separately sold in the market.

5. DEWALT DCS520B 60V Cordless

Tools included:

  • Cutting depth: 2-1/8”
  • Depth control: yes
  • Rail length: ----
  • Splitter: zero clearance cutting system
  • Motor: brushless motor
  • RPM: 1750 - 4000
  • Weight: 12.5 lbs

pros

cons

• Solid built

• No serious negative issues so far

• Smooth cutting

• Powerful and long lasting

The extra portability because it is cordless gives more comfort for this tool. It provides decent power which can cut 280 linear feet of 5/8” plywood using only one 6Ah battery. The saw blade that comes with it is durable and sharp. It can cut around 800 linear feet of plywood. Its plunge mechanism works well and it slides smoothly on the track.

So far there has been no serious negative problem with this track saw.

6. SHOP FOX W1835

Tools included:

  • Cutting depth: 1-5/8” – 1-7/16”
  • Depth control: yes
  • Rail length: 50”
  • Splitter: riving knife
  • Motor: 120V 9A 1.1kW
  • RPM: 5500
  • Weight: 12.79 lbs

pros

cons

• Powerful motor

• Modify the track

• Solid tool body

• Change stock blade

• Smooth cutting and chip free

This is a good track saw for intermediate woodworkers. Stand alone, this tool works really well but there can be some modifications to further improve its performance. Some of these modifications include removing the guide strip on the track and placing them farther apart. Another option is to remove the guides and replace it with a UHMW tape on the bottom of the tool. Overall, the saw’s body is solid and the motor is extremely reliable.

Remind: replace the stock blade with a better one such as Oshlum.

7. Triton TTS1400

Tools included:

  • Cutting depth: 2-1/8”
  • Depth control: Yes
  • Rail length: TTSTP or TTST1500
  • Splitter: riving knife
  • Motor: 1400W 12A
  • RPM: 2000 – 5300
  • Weight: 6.53 lbs

pros

cons

• Easy to use

• You need to pay attention to the squareness when setting it up for the first time

• Decent power

• Smooth ride on the track

It delivers decent power for smooth cutting of plywoods and timber. It operates at a low noise level and the dust collection system is very effective. No problem when the saw rides on the track. Sturdy infrastructure and nice design.

Eventually, you need to pay attention to the squareness when setting up this saw tool.

8. WORX WX530L Exactrack 20V 6-1/2”

Tools included:

  • Cutting depth: ---
  • Depth control: yes
  • Rail length: ---
  • Splitter: ---
  • Motor: 20V, 2Ah
  • RPM: ---
  • Weight: 3.99 lbs

pros

cons

• Precise and smooth cutting

• You need to buy a rigid track in order to avoid the blade going off the center

• Low noise level

• Durable construction

There are several things to like about this tool such as it is very lightweight and easy to use. It works perfectly when cutting the bottom off a door. This saw works best if you do the cutting nice and slow. For a cordless type, it works quite long enough due to the quality of the battery.

However, the stock blade is not that nice compared to the specialized blades sold separately.

9. WEN 36055 9Amp

Tools included:

  • Cutting depth: 1-5/8” – 2-5/32”
  • Depth control: yes
  • Rail length: 27.5”
  • Splitter: riving knife
  • Motor: 9Amp
  • RPM: 5500
  • Weight: 11 lbs

pros

cons

• Versatile and lightweight

• You can purchase a much decent saw blade for better cutting performance

• Easy to use and set up

• Affordable tool

This tool is extremely versatile and easy to operate for cutting 4x8 sheet. The 9A motor provides decent power to cut through ¾” plywood. This is an ideal cutting tool for casual cutting operations.

The stock blade is fine but you can switch to a Diablo for it is much better.

10. Grizzly T10687

Tools included:

  • Cutting depth: 2-5/32”
  • Depth control: yes
  • Rail length: ----
  • Splitter: riving knife
  • Motor: ---
  • RPM: ---
  • Weight: 12.9 lbs

pros

cons

• Versatile and lightweight

• Plunge spring is quite stiff

• Affordable and decent saw tool

This tool is really affordable and the quality is decent for occasional cutting operations. It is lightweight and very versatile to use. Overall construction is sturdy and the adjustments are easy to understand.

The plunge spring of the tool is quite stiff and so you can cut off ¾” to 1” of its length.

  • Updated June 5, 2019
  • Saws
Kevin Smith
 

Hi, i'm a coffee addicted guy and i love my home so that i create this website to discuss about luxury home stuff and how to improve our lifestyle with stuffs.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: