Trim Saw vs Circular Saw- No More Confusion To Differ Two Ideal Saws (1)

Trim Saw vs Circular Saw: No More Confusion To Differ Two Ideal Saws

"I hope you love the products I recommend! When you buy through links on, I may earn an affiliate commission."

The woodworking industry has the backup of a hell lot of equipment and tools, which a woodworker always wishes to have for easy working.

We can always find a range of saws in the market, very similar yet used for doing different tasks. But how can a novice woodworker differentiate among them? They look so similar- the same kind of structure, those wired connections and then the knife.

Well when we come down to trim saws and Circular saws, we encounter the same confusion yet again. So let’s go ahead and get to know all the major and minor differences between the tools and see the brief of Trim Saw vs. Circular Saw.


Trim Saw vs. Circular Saw
– What’s The Real Difference?

What is the real difference between the trim saw and the almost identical circular saw? Well, basically a trim saw is the tiny version of a circular saw. The trim saws are lighter as well as smaller than the circular saws.

A trim saw comes with a blade size less than 6 and a half inch. The blade size of the trim saws varies from around 5 ½” or 5 ?” and in some cases, it can be as small as 4 inches. Whereas a standard circular saw is a saw with blade size 6 and a half inches and above.

A Trim saw can be used to cut stones, rocks , glass, tile or cleanly trim facet material.

Hi-Tech Diamond 6" Lapidary Trim Saw via

General Overview:
Trim Saw vs. Circular Saw

Well, a trim saw is actually a small version of the circular saw that is very ideally priced and has a great battery backup. Trim saws justifying their name as they are best used for trim work. The small and narrow blade gives your work the much-needed precision.

Circular saws are the wired and larger version of this small specimen” trim saw”. Circular saws are wired and thus are a bit tough to use and handle. These saws are used for thicker materials like framing timber and on other wood that has no binding.

Circular saw

Circular saws are also used in ample to cut through structural timber due to their large blades and powerful motors.

Uses for Each:
Trim Saw vs. Circular Saw

Trim saws, as their name suggests, are used for “ trimming “ work, the size of the small trim saw limits its potential. Trim saws are generally used to cut sheet good, along with another small job including trim work involved in paneling, cabinetry and molding work.

Trim saw is a bit less powerful than the standard circular saw but can still be used for material management and cutting long straight lines in cutting flooring material, ripping off the sheet stock along with reducing the stock used for cabinetry and other lighter furniture.

Circular saw

Circular saw

Trim saws are very light and the wood worker working with a trim saw generally doesn’t need any assistance as he functions the trim saw with one hand and holds the stock in place with the other.

Trim saw is an utilizable tool, anywhere and everywhere where a circular saw seems unnecessary. Well, when speaking of circular saws they are heavier as well as larger than their counterpart trim saw.

Circular saw can easily replace trim saw, but only for its weight, it is rejected for use at some places. It is very much suitable for thicker materials like framing timber and other wood that have no binding.

Circular saws are also used in ample to cut through structural timber due to their large blades and powerful motor.

Well both the saws are identically different when it comes to cutting stock, the circular saw may seem a bit over the top if used in place of a trim saw and the trim saw wouldn’t even make an inch past the wood.

Advantages - Trim Saw vs. Circular Saw a Brief Discussion

One may say that well the circular saw straightway wins when speaking about advantages. But this is not the actual case.The low price of a trim saw makes its place in your tool box, which leads on to become an essential tool.

Well, the circular saw is wired and thus isn’t as hassle-free as the trim saw which is a small saw and is very useful and handy. It is actually the tool for every beginner woodworking projects and is thus liked by the novice.

The circular saw is clearly useful when an experienced woodworker uses it, whereas a trim saw doesn’t tear off wood and is very compatible with thinner stuff.

The circular saw drains out the battery very soon as compared to that of a trim saw, which almost lasts a whole working evening.

A circular saw whereas is an asset to be owned by one and all, and a trim saw is not a complete substitute for a circular but just an emergency substitute. A trim saw just cannot take up the entire place of a circular saw at any cost.

Top Picks: The Best Trim Saw vs. Circular Saw

DeWalt 18V Cordless 6.5 inch Circular Saw

DEWALT Bare-Tool DC390B 6-1/2-Inch 18-Volt Cordless Circular Saw via Amazon

DEWALT Bare-Tool DC390B 6-1/2-Inch 18-Volt Cordless Circular Saw via Amazon

  • Featured with rpm 3700 which allows one to deliver fast rip cuts
  • Carbide tipped blade for a speedy cutting with sharpness
  • High strength magnesium shoes
  • Upper guard
  • Cordless circular saw
  • Fan cooled motor comes with replaceable brushes
  • Extended battery life allowing extended run time

Craftsman Bolt-On ™ 3-3/8'' Trim Saw

Craftsman Bolt-On ™ 3-3/8'' Trim Saw via Amazon

Craftsman Bolt-On ™ 3-3/8'' Trim Saw via Amazon

  • Rips plywood, cross cuts boards and bevels edge quickly and accurately.
  • 50-degree bevel capacity allowing one to craft tight joints and miters.
  • Die cast aluminum blade guard delivers lightweight protection
  • Spindle lock makes blade change fast and easy
  • Edge guides ensure accurate cuts
  • Uses a 5 ½ in. blade
  • Featured with an rpm 45008. Depth setting adjustment works with the turn of a wrist and is thus very compatible
  • Laser display in this setup makes cutting straight much easier
  • It is a part of the C3 system
  • Battery powered and thus portable

Makita 18V 6.5 Inch Circular Saw

Makita XSH03Z 18V LXT Lithium-Ion Brushless Cordless 6-1/2

Makita XSH03Z 18V LXT Lithium-Ion Brushless Cordless 6-1/2" Circular Saw via Amazon

  • Compact
  • Ergonomic design
  • Featured with rpm 3700 which allows one to deliver fast rip cuts and used to rip through woods
  • Reduces operator fatigue
  • 50-degree maximum bevel cutting capacity
  • The saw is engineered with a heavy gauge along with precision machined base for smooth, accurate cutting and added durability
  • Designed for a variety of cutting task and is thus perfect for roofing, carpentry, remodeling, woodworking and for the pro contractor who requires a best-in-class engineered cordless circular saw for his regular use

Bottom Line

Before you go for a saw, the very necessary thing to keep in mind is the material you will work on and the is a balanced comparison of kind of finish you need. Even if they are used for similar work, they can be based on the different materials used.

The few basic things to keep in mind before purchasing any of the saw is the motor, ergonomics (handling safety) blade material and durability as well as the saw brand.

Closeup side view of a mid 30's man doing some carpentry work at a workshop.

Safety is another major issue when using a saw, whether the tiny trim saw or maybe the big circular saw; one should place the stock carefully and in straight lines before carrying on the procedure safely.

Scroll to Top